Product Description
TRED SAFE is a tough, abrasive, anti-slip, one-part coating for a variety of interior or exterior applications. It has a textured, flat finish that will substantially reduce the threat of slippage, resulting in fewer injuries and major cost savings. This product is not for use in areas where it will be underwater. It is also not for use on garage floors or other areas of wheeled vehicle traffic. Do not mix with oil colors, other paint products or solvents.
Product Features
- Low odor
- Low VOC
- Easily maintained with soap and water
- Stock color is silver gray; also available in black, handicap blue, yellow, red, green, walnut brown, bombay, navy gray, dark gray
- Textured flat finish
- Lead, chromate and mercury free
Applications
- Walkways
- Steps
- Ramps
- Metal Surfaces
- Wood
- Boat Docks
- Concrete
- Locker Room Floors
- Boat Decks
Directions for Use
All surfaces must be clean and free of dust, dirt, grease, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. New masonry surfaces should age 30 days before being coated. Concrete that is new, smooth troweled or suspected of being treated with chemical deicers needs to be etched with a 10% solution of muratic acid and allowed to thoroughly dry before painting. Glossy surfaces should be dulled with fine sandpaper to ensure proper adhesion. Unpainted metal surfaces must be primed with metal primer before coating. Previously painted surfaces in poor condition require the removal of old paint before coating. Apply with brush, roller or trowel. Floors are dry to walk on after 24 hours under good drying conditions.
Storage Temp: 35°F-120°F
Coverage: 100-125 sq. ft/gal
Recommended film per coat:
Wet: 12.8-16.0 mils; Dry: 5.0-8.0 mils
Application Temperature: Min. 50°F; Max. 90°F
Dry Time: 2-4 hours tack-free; 18-24 hours to recoat; Hard in 7-14 days
