Product Description
SURE PATCH – is a three component, 100% solid epoxy mortar designed for resurfacing and repairing damaged or inferior concrete. Recommended for heavy traffic areas or anywhere high strength and excellent wear characteristics are required.
Product Features
- High strength
- 3 Component, 100% solid epoxy mortar
- Excellent impact resistance
- No primer or topcoat needed
- Available in a 2 gallon pail (2095701) & 5 gallon pail (2095801)
Applications
- Driveways
- Sidewalks
- Concrete Floor & Walls
- Concrete & Cement
- Anchoring Machinery
- Ramps
Directions for Use
curing compounds. Make sure the floor is dry before applying product. Store materials at room temperature prior to using. Apply material between 55-90°F. Product can be applied without a primer; however, any
suitable primer can be used depending on application requirements. Mix the Part A and Part B together thoroughly (be certain the mix ratio is correct). After the Part A and Part B are mixed, add in the aggregate. Thoroughly mix to make sure all of the aggregate is wetted out properly. Apply the mixed mortar at the recommended thickness using a hand or power trowel or other suitable equipment.
Cure Schedule:
Pot life (.45 cu. ft. mix) ………………30-40 minutes @ 70°F
Recoat or topcoat…..…………….7-8 hours @ 70°F
Light foot traffic………………14-16 hours @ 70°F
Full cure (heavy traffic)………………….2-7 days @ 70°F
Application Temperature: 55-90°F
Primer: None required.
Topcoat: None required.
Recommended For: Recommended for heavy traffic areas, forklift traffic and steel wheel equipment production areas.
Not Recommended For: Immersion applications for acids and chemicals.
*Improper mixing may result in product failure.