DURA BOND is a hand-mixable epoxy adhesive/sealant that cures in minutes to permanently repair almost anything made of metal, concrete, wood, ceramic, glass and many plastics. It consists of two parts, a base and a contrasting colored curing agent. Once the base and curing agent are thoroughly blended, the putty-like mixture will appear uniform in color and will harden like steel after 20 minutes. After just one hour, it is completely cured and can be sanded, filed, painted and even drilled and tapped as though it were metal. Exhibits resistance to abrasion and a variety of chemicals, excellent adhesion to wet and dry surfaces and good electrical insulating properties. Contains no solvents, is nontoxic, and is easily readied for application without any mess. Unlike liquid epoxies, it will not drip, sag or shrink. DURA BOND can be used to patch holes and cracks.
Not recommended for use on polyethylene or polypropylene.
- Can be used underwater to plug and seal anything that leaks
- Cures in minutes
- Not effected by diesel fuel
- Nonflammable and releases no noxious fumes
- Plumbing Repairs
- Ceramic Repairs
- Auto Repairs
- Underwater Repair
- Industrial Applications
- Custom Formed Gaskets
- Home Repairs
Directions for Use
DURA BOND adheres to most surfaces. Best results are achieved if area is first roughened by sandpaper or filed to clean and prepare surface. Break off required portion of DURA BOND. Twist and knead until uniform color is achieved – no streaks. Apply at once to surface. 2 minute work life @75°F. Remove excess before it hardens. A smooth finish can be obtained by rubbing with wet finger or damp cloth before hardening begins.
Note: Optimum mixing temperature is between >40°F and <110°F. Higher temperatures cause faster curing times.