Aerosol Vandal Mark & Graffiti Remover 1158201

Product Description

MARK OUT II heavy-duty, thick clinging gel that provides extended surface contact cleaning time with no CFCs. Cuts quickly through stubborn vandal marks without running or dripping. Effective on porous and non-porous surfaces. Removes spray paint, lipstick, ink, pencils, pens, crayons and more. Safe on brick, concrete, tile, formica, porcelain, baked enamels, chrome, walls, fences, glass, metal and most painted surfaces.

Product Features

  • Heavy-duty, thick clinging gel will not run off
  • No CFCs
  • Effective on porous and non-porous surfaces
  • Contains no ozone depleting chemicals
  • Use indoors and outdoors
  • Made in the USA


  • Crayon
  • Pencil
  • Lipstick
  • Mimeo Ink
  • Masking Tap
  • Ball Point Inks
  • Spray Paint

For Use On

  • Fiberglass
  • Concrete
  • Enamels
  • Trucks
  • Buses
  • Brick
  • Marble
  • Formica
  • Porcelain
  • Sidewalks
  • Bridges
  • Ceramic
  • Chrome
  • Varnishes
  • Fences
  • Signs
  • Tile
  • Glass
  • Baked Enamel
  • Washroom Walls
  • Public Buildings

Directions for Use

Spray onto marks. Wait 5-10 minutes. Remove with clean cloth. If stubborn, repeat application. Allow to stand 30 to 60 minutes. If accumulation is heavy, remove with spatula, then re-spray. If extreme stubbornness is encountered, use stiff bristle brush and work into the stain. Spray on again –
wipe off again. Use clean brush or cloth.
*Care should be exercised when used on synthetic surfaces which are susceptible to solvent damage (asphalt tile, rubber, some paints and some plastics).
Not recommended on flat or semi-gloss painted surfaces. Pretest in hidden area if uncertain.

Document Download Center