KON KLEEN II is a highly concentrated blend of detergents, alkali builders, emulsifiers and solvents for fast and effective removal of dirt and grease. It is designed to loosen grease and grime on all concrete surfaces and floors. The product is great for cleaning garages, filling stations, paved parking areas or any industrial facility where there are concrete surfaces to be cleaned. KON KLEEN II is biodegradable and contains no phosphates.
- Fast acting
- Highly concentrated
- Removes grease and grime
- Dissolves easy and leaves no residue
- Contains no phosphates
- Changes from yellow to green to show the alkalinity become a solution
For Use By
- Filing Stations
- Paved Parking Area
- Industrial Facilities
Directions for Use
Wet surfaces to be cleaned with hot water. Sprinkle product generously, let stand for 15 min. Scrub surface, rinse with clear water. DO NOT USE on resilient tile or composition surface.
CONCRETE FLOORS: Wet floors, sprinkle on and allow to set for a few minutes. Scour with deck brush and rinse with clean water. This product penetrates and emulsifies hard to get soils.
PRESSURE TYPE SPRAY SYSTEMS: Add 3 to 5 pounds per 100 gallons of water in solution tank depending on pressure. High pressure units require less concentration than low pressure units.
MANUAL TIRE CLEANING: Add 2 to 4 oz. per gallon of water. Apply with brush in circular motions. Rinse washed areas with plenty of clear water.
WARNING: May be irritating to skin and eyes. Contains sodium metasilicate and sodium carbonate. Product will absorb moisture from the air. Do not transfer to unmarked container. Use in adequate ventilation.