Product Description
SANITIZING SURFACE WIPES is a non-woven, disposable wipe, pre-saturated with a versatile broad-spectrum sanitizer that has multiple uses on a wide variety of surfaces. This product was tested in accordance with AOAC methods and meets EPA requirements for sanitizing previously cleaned, food contact surfaces. This product has been cleared by EPA in the Code of Federal Regulations (40CFR180.940) for use on food contact surfaces in homes, public eating places, restaurants, bars, taverns, institutional kitchens, food handling and processing areas and food preparation lines without the requirement.
Product Features
- Kills 99.9% of bacteria in just 30 seconds
- Kills 99.9% of bacteria that can cause food borne illness on hard, non-porous surfaces in just 1 minute
- Sanitizer for homes, institutional and industrial use
- No rinse formula, does not require a potable water rinse after using
- Antibacterial formula sanitizes food and non-food contact surfaces
- 100 wipes per canister
- EPA registered
Applications:
- Cabinets
- Carts
- Telephones
- Appliance Interiors/Exteriors
- Glazed Porcelain
- Counters
- Desks
- Computers
- Glazed Ceramic Tile
- Bathtubs
- Trash Cans
- Railings
- Keyboards
- Metal/Stainless Steel Surfaces
- Tables
- Faucets
- Tiles
- Doorknobs
- Walls
- Showers
- Toilets
- Sinks
- Stove Tops
- Chairs
For Use By:
- Veterinary Clinics
- Food Handling & Processing Areas
- Zoos
- Airports
- Daycare Centers
- Gyms/Health Clubs
- Kennels
- Bathrooms
- Kitchens
- Restaurants
- Schools
- Funeral Homes
- Correctional Facilities
- Stores
Note: Not for personal cleansing.
Directions for Use
SANITIZING FOOD CONTACT SURFACES: This product is for use in homes, schools, dairies, restaurants, bars, taverns, institutional kitchens, food handling and processing areas, food preparation lines to sanitize pre-cleaned, hard, non-porous, food contact surfaces. Prior to application, remove all gross food particles and soil from surfaces that are to be sanitized. Thoroughly wash or flush the surfaces with a good detergent, followed by a potable water rinse before applying this sanitizing wipe. For lightly soiled surfaces, use the first wipe to pre-clean the surface to be treated. This product is a 400 ppm (mg/L) active quaternary pre-saturated wipe which kills 99.999% of bacteria: Staphylococcus aureus (Staph) (ATCC
#6538), Escherichia coli (E. coli) (ATCC #11229) in 60 seconds in accordance with the AOAC Germicidal and Detergent Sanitizing Action of Disinfectants test.
To sanitize hard, non-porous food contact surfaces: Each square inch of wipe will sanitize 1.28 square inches of surface. Allow surface to remain wet for 60 seconds. Let surface dry.
NO POTABLE WATER RINSE IS ALLOWED.
Use a fresh wipe for each new surface to be sanitized. Do not use to sanitize glassware, cookware, eating utensils and unfinished wooden cutting boards. Do not use to sanitize food preparation surfaces that are scored or gouged with narrow crevices that cannot be penetrated by wiping. Do not use to sanitize other food contact surfaces that by their design or configuration cannot be fully reached or covered by a wet wipe.
SANITIZING NON-FOOD CONTACT SURFACES: This product is for use in homes, schools, dairies, restaurants, bars, taverns, institutional kitchens, food handling and processing areas, food preparation lines to sanitize pre-cleaned, hard, non-porous, non-food contact surfaces. Prior to application, remove all gross soil from surfaces that are to be sanitized. Thoroughly wash or flush the surfaces with a good detergent, followed by a potable water rinse before applying this sanitizing wipe. For lightly soiled surfaces, use the first wipe to pre-clean the surface to be treated. This product is a 400 ppm (mg/L) active quaternary pre-saturated wipe which kills 99.9% of bacteria: Staphylococcus aureus (Staph) (ATCC #6538) and Klebsiella pneumoniae (ATCC #4352) in 30 seconds in accordance with the Sanitizer Test for Inanimate Non-Food Contact Surfaces.
Efficacy tests have demonstrated that this product is an effective sanitizer in the presence of organic soil load (5% blood serum) for food and non-food contact surfaces. To sanitize hard, non-porous surfaces: Each square inch of wipe will sanitize 1.28 square inches of surface. Allow surface to remain wet for 30 seconds. Let surface dry. No rinsing is required. This product will not harm most surfaces: including acrylic, sealed fiberglass and vinyl. Do not use on unpainted wood. Not for personal cleansing. This is not a baby wipe! Do not flush in toilet.