Product Description
FREE ALL II is scientifically formulated penetrating oil and rust dissolver containing micron size particles of PTFE and Moly. This super penetrant carries the PTFE and molybdenum disulfide particles into the threads, crevices, etc. These particles act as millions of tiny ball bearings to prevent seizing and galling while the parts are being removed. This product is designed to be used on all dismantling jobs throughout the plant, shop or wherever parts are frozen or hard to operate. Quickly loosens corroded nuts, studs, bolts, flanges and pipe joints.
Product Features
- Contains PTFE and Moly for excellent lubrication
- Frees nuts, bolts and studs
- Leaves permanent rust protection
- Quickly loosens rusted parts and displaces moisture
- Withstands heavy loads
- Resists rust and corrosion even in extreme conditions
- Prolongs life of machinery
- Can be sprayed on wet engines to displace moisture on electronics
Applications
- Nuts
- Bolts
- Door Hinges
- Flanges
- Industrial Parts
- Gears
- Studs
- Wire Cable
- Chains
- Blocks & Tackle
- Forklift
- Cranes
- Sprockets
- Hoists
- Construction Machinery
- Pipe Joints
- Pulleys
- Conveyors
- Locks
Directions for Use
Shake well. Remove protective cap and point spray opening in desired direction. Holding container 6-12 inches from surface to be treated, spray product liberally, saturating joints. Allow to set 5-10 minutes and break out. For extremely difficult jobs, saturate joints and allow to set 5-10 minutes, then tap lightly with a hammer and break out.