Product Description
CON-SEAL is a soybean oil-modified urethane that exhibits fast dry, high gloss, and water, mar and abrasion resistance. This product can be applied on wood flooring and gym floors, cabinets, concrete, masonry, stone wash, stone and terrazzo. It can be used in schools, kitchens, institutions, and more.
Product Features
- Soybean oil-modified urethane
- Fast-drying
- High gloss
- Water, mar and abrasion resistant
Applications
- Wood Flooring
- Gym Floors
- Cabinets
- Concrete
- Masonry
- Stone Wash
- Stone
- Terrazzo
Directions for Use
For Concrete Floors: New concrete floors must age a minimum of 90 days before applying this product. 1) Clean floor with a wire brush and suitable cleaners/strippers to remove all grease, oil, wax and other foreign materials. 2) If concrete is smooth with little or no roughness, an acid etch is recommended. The acid etch should produce the “feel of medium grade sandpaper” on the concrete surface. The acid etch should follow the cleaning operation and eliminates the need for a vinegar rinse. Rinse thoroughly and pick up with wet vacuum if possible. 3) Allow the floor to dry at least 24 hours or until it is thoroughly dry. 4) Apply one to two coats with roller or lamb’s wool applicator. Allow 6 to 8 hour dry between coats. 5) Allow 12 hours dry after second coat and before subjecting floor to traffic.
Do not apply paint over CON-SEAL, as paint will not adhere. Do not use on asphalt or rubber tile.
Coverage: Approx. 300 ft² per gallon.