b'ANCHOR-IT #2447 ANCHOR-IT is a two-component, 100% solids, rapid setting, epoxy anchoring system packaged in easy-to-use dual cartridges. This unique cartridge assures the Two-Part Epoxy Anchoring System correct portioning and thorough mixing of the epoxy, which is color-coded to assure that mixing is complete. Cartridge dispensing system assures correct ratio will be maintained ANCHOR-IT has a wide variety of uses, including setting Conforms to Grade 3, Class A, Type I, IV & V of ASTM C881 of machine anchor bolts for load bearing applications. Nonsag, nonabrasive Dispense with the ANCHOR-IT Handgun #4225. Pull out strength: 12,000 psi; Tensile strength: 8,000 psiMay be applied to dry or damp concrete or in humid conditionsNOTE: Do not apply when temperature is below 33F or to latex-modified mortarAppearance A: White paste; B: Black pasteor latex-modified concrete. Odor A: Almost odorless; B: AmmoniaIdeal for: dowel bars, rebar, anchor bolts, bonding hardened concrete,Pot Life 5-10 minutesbinder for epoxy materials, sealing cracks in asphalt and concrete Packaging Two 300 mL cartridges mix 1:1 to make 600 mL epoxyC-JOINT #2445 C-JOINT is a two-component, heavy-duty epoxy joint filler for industrial floors. It may be used for repairing spalls, cracks and damaged joints. It can also be used as a joint filler for industrial concrete floors subjected to Two-Component Concrete Floor Joint Sealer hard-wheeled vehicles such as forklifts.2 year shelf life when unopened.C-JOINT is also available in cartridges.Easy to use 1:1volume mix ratio C-JOINT Gray Cartridges - #244501Color coded to ensure proper mixing ratio C-JOINT Clear Cartridges - #244503Retains resiliency and does not become brittle with ageExcellent wear resistanceSemirigid to support heavy loads across the jointTensile strength: 400-600 psi (ASTM D-638)100% solids Appearance A: White liquidB: Medium viscosity blackDo not use on true expansion joints, exterior joints, tooledOdor A: Slight epoxy odor; B: Ammoniajoints or joints subject to chemical exposure. Pot Life 15-25 minutesIdeal for: cracks, damaged joints, flexible grout for tile and brick, cracksDry Time Initial cure 6-8 hrs, traffic ready 8-12 hrsfiller/sealer for saw-cut control, spalls and moisture barrier coating Packaging 1 gal epoxy and 1 gal hardener per 2 gal kitCRACK FILLER #2123 This two-component, clear epoxy coating is specifically designed as a resurfacer for pitted, spalled, cracked or damaged concrete. CRACK FILLER is also an excellent heavy-duty chemical resistant coating for Two Component Epoxy Resurfacer long-term protection of concrete surfaces. It exhibits excellent clarity with Extremely effective for heavy traffic good chemical wear and abrasion resistance.Excellent chemical resistance Self leveling Appearance Clear liquidContains no solvents Odor Almost noneCrystal clear Pot Life 15 min at 75FDry Time Tack Free - 2-3 hours at 75F,Light traffic 8-12 hours, Full cure - 7 daysIdeal for:concrete Coverage 250 Sq Ft at 6 milsPackaging 1 gal resin and 1 gal hardener per 2 gal kit41'