b'DURA SEAL #2489, #2128 DURA SEAL is a waterbased, premeasured, two-part pigmented epoxy coating formulated to provide a tough concrete seal against chemical penetration (including brake fluid) and physical deterioration of existing concrete. Regular maintenance and cleanup is simple by using any Pro Waterborne Two-Part Epoxy Concrete Coating Chem water-based degreaser. DURA SEAL has a low odor which makes it an ideal product to use in facilities such as hospitals, schools and nursing Dries to a high gloss that is easy to clean - 46% solids homes where the presence of solvent odors and/or flammability problems Excellent resistance rating against brake fluid, salts, solvents and oils would normally prohibit the application of a sealer.Low VOC, no objectionable solvent odorsAnti-slip additives may be added to increase tractionStock colors: light gray and clear, several other colors are available (see page 37)NOTE:All dry and cure times are based on 75F at 50% humidity. Individual dry times and pot life may vary depending upon other conditions. Application is not recommended where the indoor relative humidity is over 80% or where the surface temperature to be coated is less than 60F. For best results, apply two thin coats rather than one thick coat.Appearance Part A Various colors available, stock color is light gray; Part B Clear liquidFragrance SlightCoverage (6 mil thickness recommended) Colors: 1st Coat: 225 sq. ft./gal; Additional Coats: 250 sq. ft./galClear: 1st Coat: 300 sq. ft./gal; Additional Coats: 400 sq. ft./galPot Life 90 minutesDry Time 2nd coat 2-6 hours, Open to light traffic 12-24 hours;Maximum hardness 5-7 daysIdeal for: automobile repair bays, repair shops, industrial plants,Packaging 1 gallon kit or 5 gallon kit.Each contains one hospitals, schools, commercial buildings, warehouses epoxy and one hardener.SURFACE SEAL #2126, #2127 SURFACE SEAL is a premium, 2-component catalyzed, polyamide epoxy coating with exceptionally high gloss, hardness and overall performance. Designed to protect and beautify interior and exterior masonry, metal and Two-Part Solvent-Based Polyamidefiberglass, the application possibilities are endless. It produces a heavy duty, high gloss film that is highly resistant to scrubbing, scuffing and Epoxy Coating various industrial chemicals including strong acids. Not only does it provide an excellent visual appearance, it is outstanding for use where wearing, Waterproof, highly resistant to heavy traffic,abrasion, algae and mildew are a problem. Can be applied to acids, caustics and fuelspreviously painted surfaces. Coating is not UV resistant and will Premium epoxy coating get dull when used outside. Coating thickness is 3-4 mils when Provides a high gloss appearance wet and 1.5-2 after drying.Solvent-borne formula *Can be applied to previously painted surfaces.Ideal for:concrete, metal, fiberglass, brick, wood, automotive undercoating,Appearance Part A - Viscous liquid; Part B - Clearsteelpipes,pumps,hardboard,plaster,concretefloors,cementblock,Odor Part A - Pungent; Part B - Pungentstorage tanks, drain wells, drywall36 Floor Maintenance'