Chill Out

# 1708
Product Image

Rapid Freezing Penetrant Lubricant

Features

  • Freezing action breaks open rust barrier
  • Non-conductive to 33000 volts
  • Ultra low VOC content
  • No chlorinated solvents no ozone depleters
  • 360 degree valve to spray in any position
  • Large button helps prevent freezing skin
  • Converts rust to black liquid

Description

By combining rapid freezing action with an advanced rust eating formula Pro Chem has developed the latest breakthrough in penetrant lubricant technology.

The rapid freezing action produces shrinkage of sprayed parts to quickly break down open micro fine crevices allowing the lubricant to easily penetrate even the toughest rust. CHILL OUT then dissolves and converts rust making the job a snap and future maintenance repair easier as well.

Applications

  • Exhaust Flanges
  • Marine Applications
  • Rusted Manifold Bolts
  • Industrial Applications
  • Outdoor Exposed Equipment

 

Directions

Note: Sudden temperature drop can result in “thermal shock” which may cause crazing of some plastics and paint. While appropriate for use on many plastics and painted surfaces always test in an inconspicuous area before general use. Accumulated vapors from this product may reach ignition condition in confined spaces. Always use with adequate ventilation.
Shake well before using. Insert extension tube provided. Spray liberally for 5-10 seconds on surface to be lubricated. Target the bolt, nut, or part and limit the amount of contact to the surrounding area. Wait 30 seconds to allow temperature reduction and to facilitate penetration. Loosen or remove part. Repeat if necessary.

 

HEALTH 2
FLAMMABILITY 3
REACTIVITY 0
PERSONAL PROTECTION B


  • Appearance: Colorless spray
  • Odor: Faint – Solvent

 

Request More Information

Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer.  In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase.  For full credit on the unused portion, request a Return Authorization Number from our customer service department.  No returns will be accepted without an RA number. 

We cannot issue credit on any goods purchased more than 90 days previously.  All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges. 

Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.