PC 565 PST Pipe Sealant

# 2472
Product Image

Thread Sealant

Features

  • Lubricates with PTFE
  • For metal fittings, performs well on aluminum, steel, plated, and brass
  • Recommended for tapered & straight pipe threads
  • Good temperature and solvent resistance
  • Lubricates parts during assembly

Description

PC 565 PST PIPE SEALANT is a single component, creamy paste-like anaerobic pipe sealant compound. The product cures when confined in the absence of air between close fitting metal surfaces. It cures slowly, but provides an instant seal. This product is anaerobic with no solvents and no shrinkage, and provides a vibration-proof seal that is resistant to most chemicals and corrosion. It can be used on most hydraulic, pneumatic, oil, water, and gas connections. This industrial grade sealant develops controlled low strength seals on threaded fasteners to facilitate disassembly with standard hand tools.

Applications

  • Chemical processing
  • Pulp/paper
  • Petroleum refining
  • Waste treatment
  • Textile
  • Utilities/power generators
  • Automotive
  • Industrial plants
  • Marine
  • Plumbing
    

Directions

Recommended for sealing metal tapered pipe threads and fittings (up to 5cm/2in) for industrial applications. For best performance, surfaces should be clean and free of grease. Product should be applied to the thread engagement area in sufficient quantity to fill second and third threads while leaving the first thread free of sealant. Product is normally hand-applied from the tube or brushed directly onto threaded
parts. This product performs best in thin bond gaps (0.05mm). Very large thread sizes may create large gaps which will affect cure speed and strength. Note: For maximum pressure and solvent resistance,
allow at least 72 hours at 72°F for product to fully cure before filling and pressurizing the system.

 

HEALTH 2
FLAMMABILITY 1
REACTIVITY 1
PERSONAL PROTECTION B


 

  • Appearance: White paste
  • Odor: Mild

Request More Information

Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer.  In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase.  For full credit on the unused portion, request a Return Authorization Number from our customer service department.  No returns will be accepted without an RA number. 

We cannot issue credit on any goods purchased more than 90 days previously.  All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges. 

Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.