True Bond Patch

# 2462
Product Image

Ready to Use Asphalt Patching Compund

Features

  • Will not harden until compressed
  • Long lasting – unaffected by freezing temperatures
  • Matches original blacktop surfaces
  • Can be used on wet or dry surface
  • Easy to apply- no mixing required
  • Smaller aggregate allows better fill
  • Will not track
  • Area can be immediately opened to traffic

Description

TRUE BOND PATCH is a ready-mixed compound for repairing holes and expansion joints in asphalt or concrete surface. It is a carefully prepared blend of finely graded mineral aggregate and specially prepared asphalt. TRUE BOND PATCH sticks to asphalt and concrete without a primer, even in cool, wet weather.

Applications

  • Parking lots
  • Driveways
  • Streets

Directions

The surface should be clean of grease, oil and dirt. If extremely dusty, hose the surface down with water. The surface need not be dry before applying. Take care to keep vertical edges of hole as  clean as possible to allow for best adhesion. Material works best over a solid base, do not use over mud or clay. Remove material from the drum just as it is and place it where needed by shoveling or pouring it in. Level material slightly higher than desired depth to allow for compaction. Pack it down with a hand tamper or roller. If the void is deeper than 1 inch, tamp material down in successive layers of 1 inch to assure maximum compression. No drying or curing time is required. Area can be immediately opened to traffic. Up to three year shelf life.

Coverage rate is approximately 7 square feet at 1 inch deep.

 

Health

1

Flammability

1

Reactivity

0

Personal Protection

B

 

  • Appearance: Black, coated stone
  • Odor: Petroleum

     

Request More Information

Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer.  In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase.  For full credit on the unused portion, request a Return Authorization Number from our customer service department.  No returns will be accepted without an RA number. 

We cannot issue credit on any goods purchased more than 90 days previously.  All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges. 

Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.