Kon Kleen

# 3607

Product Image

Powdered Concrete Floor Cleaner

Features

  • Fast-acting
  • Removes oil and gasoline stains
  • Highly concentrated
  • Food Processing Acceptability: C-1

Description

KON KLEEN is a powdered blend of alkali builders, detergents, emulsifiers and solvents that is effective in removing oil, dirt, grease and gasoline from concrete floors. It penetrates and emulsifies those hard to get soils. Ideal for use in garages, filling stations, bus terminals and other industrial areas.

Applications

  • Oil
  • Dirt
  • Grease
  • Gas

Directions

Concrete Floors: For best results, scrape off caked-on dirt and grease from floors before wetting down with water. Sprinkle KON KLEEN freely over entire area. Allow cleaner to remain on wet floor a few minutes, then scour with deck brush and rinse with clean water.
Pressure Type Spray Systems: Add 3-5 pounds per 100 gallons of water in solution tank depending on pressure. High pressure units require less concentration than low pressure units.
Manual Tire Cleaning: Add 2-4 oz. per gallon of water. Apply with brush in circular motions. Rinse washed areas with plenty of cold water.

HEALTH 3
FLAMMABILITY 0
REACTIVITY 1
PERSONAL PROTECTION E


  • Appearance: Moist orange powder – makes a light green solution
  • Odor: Butyl

Request More Information

Product Guarantee: We guarantee all we sell to the complete satisfaction of our customer.  In the event a product we sell fails to meet our customer’s requirements, we offer a simple return procedure that is effective up to 30 days after the date of purchase.  For full credit on the unused portion, request a Return Authorization Number from our customer service department.  No returns will be accepted without an RA number. 

We cannot issue credit on any goods purchased more than 90 days previously.  All returns for reasons other than performance quality must be in original packaging and are subject to a 15% restocking charge plus freight charges. 

Any claims resulting from damages during shipment must be made no later than 48 hours after the shipment is received.